Capabilities By Location

Pittsburgh
125 McFann Road
Valencia, PA 16059
Fax: (724) 898-3355
paint line
Maximum Width (Inches) 38
Minimum Width (Inches) 15
Maximum Input (lbs): 20,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 20
Input o.d. (Inches): 70
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. (Inches): 70
Cross Section Maximum (lbs/lineal ft):
Aluminum
Minimum Gauge (Inches): 0.013
Maximum Gauge (Inches): 0.045
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.024
Two Coat System Available Yes
slitting line
Maximum Width (Inches) 32
Maximum Input (lbs) 6,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 20
Input o.d. (Inches): 60
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. (Inches): 60
Aluminum
Minimum Gauge (Inches): 0.013
Maximum Gauge (Inches): 0.040
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.019
slitting line
Maximum Width (Inches) 72
Maximum Input (lbs): 40,000
Input i.d. Minimum (Inches): 20
Input i.d. Maximum (Inches): 24
Input o.d. (Inches): 78
Output i.d. Minimum (Inches): 20
Output i.d. Maximum (Inches): 24
Output o.d. (Inches): 78
Aluminum
Minimum Gauge (Inches): 0.014
Maximum Gauge (Inches): 0.060
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.024
memphis
200 Conalco Drive
Jackson, TN 38301
Fax: (731) 422-3606
paint line
Maximum Width (Inches) 52
Minimum Width (Inches) 20
Maximum Input (lbs): 30,000
Input i.d. Minimum (Inches): 20
Input i.d. Maximum (Inches): 20
Input o.d. Maximum (Inches): 72
Output i.d. Minimum (Inches): 20
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 60
Cross Section Maximum (lbs/lineal ft): 1.01
Aluminum
Minimum Gauge (Inches): 0.010
Maximum Gauge (Inches): 0.063
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.024
Two Coat System Available: Yes
slitting line
Maximum Width (Inches) 72
Minimum Input (lbs) 40,000
(eye horizontal)
15,000
(eye to sky)
Input i.d. Minimum (Inches): 20
Input i.d. Maximum (Inches): 24
Input o.d. Maximum (Inches): 78
Output i.d. Minimum (Inches): 20
Output i.d. Maximum (Inches): 24
Output o.d. Maximum (Inches): 78
Aluminum
Minimum Gauge (Inches): 0.010
Maximum Gauge (Inches): 0.063
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.024
embossing line
Maximum Width (Inches) 56
Maximum Input (lbs): 40,000
(eye horizontal)
15,000
(eye to sky)
Input i.d. Minimum (Inches): 20
Input i.d. Maximum (Inches): 24
Input o.d. (Inches): 78
Output i.d. Minimum (Inches): 20
Output i.d. Maximum (Inches): 24
Output o.d. (Inches): 78
Aluminum
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.060
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.024
embossing patterns
Diamond
Directional Stucco
Non-Directional Stucco
Tread Plate
milwaukee
P.O. Box 47
930 Armour Rd
Oconomowoc, WI 53066
Fax: (262) 567-8289
paint line 1
Maximum Width (Inches) 20
Minimum Width (Inches) 5
Maximum Input (lbs): 6,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 20
Input o.d. Maximum (Inches): 72
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 68
Cross Section Maximum (lbs/lineal ft):
Aluminum
Minimum Gauge (Inches): 0.012
Maximum Gauge (Inches): 0.045
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.040
Two Coat System Available: Yes
slitting line
Maximum Width (Inches) 49
Minimum Input (lbs) 10,000
(eye to sky)
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 20
Input o.d. Maximum (Inches): 60
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 62
Aluminum
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.050
Steel
Minimum Gauge (Inches): 0.006
Maximum Gauge (Inches): 0.035
paint line 2
Maximum Width (Inches) 15
Minimum Width (Inches) 4
Maximum Input (lbs): 4,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 20
Input o.d. Maximum (Inches): 64
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 64
Cross Section Maximum (lbs/lineal ft):
Aluminum
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.032
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.024
Two Coat System Available: No
chicago
11440 Addison Avenue
Franklin Park, IL 60131
Fax: (847) 455-7608
paint line
Maximum Width (Inches) 27.5
Minimum Width (Inches) 10
Maximum Input (lbs): 10,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 20
Input o.d. Maximum (Inches): 72
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 60
Cross Section Maximum (lbs/lineal ft): 2.5
Aluminum
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.050
Steel
Minimum Gauge (Inches): 0.006
Maximum Gauge (Inches): 0.030
Two Coat System Available: Yes
slitting line 1
Maximum Width (Inches) 49
Minimum Input (lbs) 20,000
(eye horizontal)
11,000
(eye to sky)
Input i.d. Minimum (Inches): 20
Input i.d. Maximum (Inches): 24
Input o.d. Maximum (Inches): 62
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 62
Aluminum
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.050
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.040
slitting line 2
Maximum Width (Inches) 24
Maximum Input (lbs): 5,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 20
Input o.d. Maximum(Inches): 62
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 62
Aluminum
Minimum Gauge (Inches): 0.010
Maximum Gauge (Inches): 0.050
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.030
embossing line
Maximum Width (Inches): 49
Maximum Input (lbs): 20,000
(eye horizontal)
11,000
(eye to sky)
Input i.d. Minimum (Inches): 20
Input i.d. Maximum (Inches): 24
Input o.d. (Inches): 62
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. (Inches): 62
Aluminum
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.050
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.040
embossing patterns
Directional Stucco
Regular Diamond
Leather Grain
philadelphia
2233 26th St SW
Allentown, PA 18103
Fax: (610) 797-7041
paint line 1
Maximum Width (Inches) 52"
Minimum Width (Inches) 18
Maximum Input (lbs): 28,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 24
Input o.d. Maximum (Inches): 64
Output i.d. Minimum (Inches): 20
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 68
Cross Section Maximum (lbs/lineal ft):
Aluminum
Minimum Gauge (Inches): 0.014
Maximum Gauge (Inches): 0.080
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.060
Two Coat System Available No
slitting line
Maximum Width (Inches) 60
Maximum Input (lbs) 30,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 20
Input o.d. Maximum (Inches): 64
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 64
Aluminum
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.080
Steel
Minimum Gauge (Inches): 0.006
Maximum Gauge (Inches): 0.060
woodstock
15920 Nelson Rd
Woodstock, IL 60098
paint line 1
Maximum Width (Inches) 26.5
Minimum Width (Inches) 6
Maximum Input (lbs): 10,000
Input i.d. Minimum (Inches): 20
Input i.d. Maximum (Inches): 20
Input o.d. Maximum (Inches): 60
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 60
Cross Section Maximum (lbs/lineal ft): 3
Aluminum
Minimum Gauge (Inches): 0.010
Maximum Gauge (Inches): 0.063
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.050
Two Coat System Available No
slitting line 1
Maximum Width (Inches) 36
Maximum Input (lbs) 15,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 24
Input o.d. Maximum (Inches): 72
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 60
Aluminum
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.075
Steel
Minimum Gauge (Inches): 0.0075
Maximum Gauge (Inches): 0.063
paint line 2
Maximum Width (Inches) 13
Minimum Width (Inches) 2
Maximum Input (lbs): 6,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 20
Input o.d. Maximum (Inches): 60
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 60
Cross Section Maximum (lbs/lineal ft): 1.5
Aluminum
Minimum Gauge (Inches): 0.010
Maximum Gauge (Inches): 0.063
Steel
Minimum Gauge (Inches): 0.008
Maximum Gauge (Inches): 0.500
Two Coat System Available No
slitting line 2
Maximum Width (Inches) 72
Maximum Input (lbs) 48,000
eye to the sky under 10K
eye to the side over 10K side unload
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 24
Input o.d. Maximum (Inches): 60
Output i.d. Minimum (Inches): 20
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 60
Aluminum
Minimum Gauge (Inches): 0.026
Maximum Gauge (Inches): 0.100
Steel
Minimum Gauge (Inches): 0.0015
Maximum Gauge (Inches): 0.090
Vorteq Pacific
8875 Industrial Ln
Rancho Cucamonga, CA 91730
paint line 1
Maximum Width Primer (Inches) 24.50
Maximum Width Finish (Inches) 26.25
Minimum Width (Inches) 4
Maximum Input (lbs): 10,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 21
Input o.d. Maximum (Inches): 60
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 65
Cross Section Maximum (lbs/lineal ft): 2.50
Aluminum
Minimum Gauge (Inches): 0.009
Maximum Gauge (Inches): 0.048
Steel
Minimum Gauge (Inches): 0.009
Maximum Gauge (Inches): 0.049
Two Coat System Available Yes
(Top Side Only)
slitting line
Maximum Width (Inches) 36
Maximum Input (lbs) 6,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 21
Input o.d. Maximum (Inches): 73
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. Maximum (Inches): 54
Aluminum
Minimum Gauge (Inches): 0.009
Maximum Gauge (Inches): 0.048
Steel
Minimum Gauge (Inches): 0.009
Maximum Gauge (Inches): 0.048
embossing line
Maximum Width (Inches): 36
Maximum Input (lbs): 6,000
Input i.d. Minimum (Inches): 16
Input i.d. Maximum (Inches): 21
Input o.d. (Inches): 73
Output i.d. Minimum (Inches): 16
Output i.d. Maximum (Inches): 20
Output o.d. (Inches): 54
Aluminum
Minimum Gauge (Inches): 0.009
Maximum Gauge (Inches): 0.048
embossing patterns
Cedar Woodgrain